No matter what kind of food it is, there will be a certain period of warranty period, and food is a consumer product with a large demand, so the frequency of shipments will be relatively high. In this regard, the food industry must meet the requirements for the use of storage shelves in warehouses. The demand for first-in, first-out goods, on the other hand, must be able to meet the requirements of high shipment frequency. Therefore, in the long-term warehouse planning, Hebei Higers storage shelves summarizes the types of shelves that meet the food industry.
1. Drive-in racks
Drive-in shelves are the best choice for many small and medium-sized food industries that need to plan shelves. On the one hand, this kind of shelf can meet the requirements of enterprises for products first-in, first-out; on the other hand, it can also be used as a drive-in shelf developed on the basis of beam-type shelves. The investment cost of enterprises is not too high, and it is basically small and medium The range acceptable to the enterprise; in addition, in the later stage, if the enterprise grows and needs to improve the storage efficiency and utilization rate, the drive-in rack can also be transformed, and on this basis, it can be upgraded to a shuttle rack to reduce investment waste of cost.
Drive-in racks are also known as corridor racks or through racks. Their storage methods are first-in, last-out or first-in, first-out modes, that is, entering and exiting from the same side is first-in-last-out, and entering from one side to the other. Out is first in first out; at the same time, during daily use, it can be used with forklifts to store pallets in the aisle; this type of storage rack can greatly improve the space utilization of the food industry.
Second, the shuttle car rack
Shuttle car shelves are no strangers to the food industry. In recent years, shuttle car shelves have begun to slowly enter many large food companies. In fact, its working principle is similar to that of the drive-in rack. The same is that the shuttle car enters the interior of the rack to store the rack; the difference is that the shuttle car rack mainly uses the shuttle car for the transportation and storage of goods. However, according to the current utilization rate of the domestic food industry, the shuttle rack is still prohibitive for most enterprises due to its high cost.Although the cost of the shuttle rack is high, it also has relative use value. The shuttle racking system is a high-density storage system composed of racks, trolleys and forklifts. This high-efficiency storage method is to improve the utilization of warehouse space and bring new storage options to customers! In recent years, Hercules shuttle intensive storage systems and solutions have made significant progress and upgrades in recent years, making them more intelligent, flexible, and more systematic, which can meet the different needs of customers in various industries. The Hercules shuttle rack is an upgraded/supplementary racking system for traditional intensive storage racks (drive-in racks, press-in racks, gravity racks, mobile racks, etc.).It integrates the characteristics of a variety of shelves, not only the dense characteristics of traditional dense storage shelves, but also the need for automatic control. The storage applications of this kind of shelf are also relatively extensive, not only in the food industry, but also in e-commerce logistics, refrigeration, textiles, shoes and clothing, auto parts, furniture and appliances, hardware and building materials, equipment manufacturing, medical chemicals, military Military supplies, commercial circulation, etc. In addition, the shuttle racks of Higris Storage Racks can also be used in conjunction with shuttle vehicles, mother-in-law vehicles, four-way vehicles, forklifts or stackers, and have higher storage density than pressure and gravity racks, and can be flexibly based on actual conditions. Choose either FIFO or FIFO functionality. The free realization of semi-automatic and fully automated storage methods is an efficient alternative to short-term storage and drive-in racks, and is an essential basic rack structure for shuttle-type intensive system solutions.
Nowadays, Higers shuttle racks have been put into use at home and abroad. The cases are as follows:
As early as 2017, UAE API company hoped to design a storage solution for its new warehouse of raw material powder for plastic products. After learning about API's product raw material characteristics and the information and opinions provided by customers, the person in charge of the Higgles project decided to recommend the customer to use the Higgles high density which has been widely used at home and abroad after discussing with the Higgles design team. Storage System - Shuttle Shelving System.
In the same year, the Dingzhou Garrison Reserve Grain Depot in Hebei also used the Higers shuttle racking system for the storage of food goods. Under the condition that the same pallet space is also stored, the land area occupied by the shuttle storage system is less than that of beam racks, drive-in racks, and fluent racks. "FIFO" and "FIFO" are stored in the shuttle. It can be achieved in the system, but it is impossible to do it with pushback and fluent style. The customer enterprise belongs to the emergency reserve military grain depot, and has high requirements for the frequency of in and out of the warehouse, space utilization, and degree of automation. Within a reasonable budget, Higers recommends the use of the shuttle vehicle intensive storage system solution.
3. Medium shelf
Medium-sized shelves are assembled from uprights, beams and laminates. It is generally suitable for medium-sized shelves stored in small and medium-sized food warehouses. Large and medium-sized food industries generally choose two types of storage shelves: through-type shelves and shuttle-type shelves.
The types of storage racks used in the food industry are summarized by Shanghai Gris storage rack manufacturers, but according to the wide application of racks, the first two are still the main push for the food industry, namely drive-in racks and shuttle racks. Of course, racking types such as beam racks and medium racks will also appear in food industry warehouses, but they will not become mainstream, but only for storage functions.
Post time: May-06-2022