Characteristics and uses of layer format shelves
The shelves in the layer format are usually manually stored and stored. They are of assembled structure, with even and adjustable layer spacing. The goods are also often bulk or not very heavy packaged goods (easy to manually access). The shelf height is usually below 2.5m, otherwise it is difficult to reach manually (if assisted by a climbing car, it can be set at about 3M). The span (i.e. length) of the unit shelf should not be too long, and the depth (i.e. width) of the unit shelf should not be too deep. According to the load capacity of each layer of the unit shelf, it can be divided into light, medium and heavy shelf type shelves. The laminates are mainly steel laminates and wood laminates.
Characteristics and uses of drawer shelf
Drawer shelf is also called mold shelf, which is mainly used to store various mold items; The top can be equipped with a mobile hoist (hand-held or electric), and the bottom of the drawer is equipped with a roller track, which can still be pulled freely with a small force after being loaded. The positioning safety device is attached, which is safe and reliable; According to the bearing capacity, it can be divided into light-weight type and weight type; Easy operation: bearing combination, sliding translation and independent formwork lifting device are adopted, without large-scale traveling crane and forklift.
1) Drawer type shelf is safe and reliable: with additional positioning device, it is safe and reliable to use.
2) Easy to operate: bearing combination, smooth sliding, and independent lifting device.
3) Simple structure: it is assembled from a variety of combined components, which is convenient for transportation, installation and disassembly.
4) Space saving: it covers an area of only 1.8 square meters and can store dozens of medium-sized molds, effectively saving space and facilitating the maintenance and management of molds.
5) According to the user’s needs, we can undertake different mold frames with different specifications.
6) The color can be customized.
7) The bearing surface adopts pattern plate, which can increase the friction and prevent the mold from sliding.
8) Modular parts can be assembled to any length.
9) The height of the foundation can be adjusted to overcome the uneven surface of the site.
Comparison of the use of layer format shelf and drawer shelf
According to the needs of customers who cooperate with Hagrid, the layer format shelf is the most commonly used one, suitable for placing various items.
Drawer type shelves are generally used together with lifting devices, which are mostly used to place heavy molds, and then lift them out. This cost is relatively high.
Post time: Sep-07-2022